Crescent Moon Cycles

New & Re-Cycled Old-Wing Parts

 fanchier@charter.net

We can get New OEM Parts from Honda for you too!!

(810)-412-6351 10AM - 6PM EST

Fits Windjammer IV, V, & SS fairings

 $22.50 Item # 05-012

Replacement Windshields:

Windshields include nylon mounting bolts, nuts, & clips

For Vetter Windjammer I through V, & SS Fairings:

Clear 21 1/2” Tall w/o Vents   $60  Item # 20-069

Clear 21 1/2” Tall w/Vents     $82  Item # 20-071

Clear 23”    Tall w/o Vents    $65  Item # 20-072

Vented Windshields include vents.

Clear 23”    Tall w/Vents     $80  Item # 20-074

Smoked 21 1/2” Tall w/o Vents   $80  Item # 20-070

Smoked 23”   Tall w/o Vents   $80  Item # 20-073

For Vetter Quick Silver Fairings:

Clear $50  Item # 20-076

Fits all Vetter Windjammer & SS Fairings: $32      Item #06-100

Snap Vents:

Snap Vents were popular options in Windjammer Fairings. And they are really wonderful, letting in fresh air on hot days. We are able to offer "better-than-original" SnapVents, now made of polycarbonate. They should last more than 20 years and should not yellow. Buy a set of two for:

   $30 per pair      Item # 06-101

Black Nylon screws, washers and nuts as used on all Vetter fairings. Exact reproduction.

Note: Beginning in 1978, all Windjammers used replacement windshields utilizing (2) black metal clips at the top instead of two upper screws.   Always use clips at the top. Never drill extra holes in your windshield.

$27.50    Item # 06-107

Windshield Bolt Kit

Black Nylon screws, washers and nuts as used on all Vetter fairings. Exact reproduction.

Note: Beginning in 1978, all Windjammers used replacement windshields utilizing (2) black metal clips at the top instead of two upper screws. Always use clips at the top. Never drill extra holes in your windshield.

$12      Item #06-104

Lowers Mounting Kit

All Windjammers after October 1973 had holes drilled for Lowers. The holes were plugged with plastic caps, incase Lowers were not purchased at that time. When Lowers are installed, the customer removed the plastic caps, pushed in these rubber expansion nuts and bolted his Lowers on.

After 30 years, the rubber nuts have become hard and won't expand. This kit includes new manufacture rubber nuts, washers and stainless steel screws, better than original. When you install Lowers, you will probably need this mounting kit.

$25.50      Item # 06-103

Note: For convenience, we reproduce only the word Windjammer without any suffex.

Edging Replacement Kit

New Genuine exact pattern and texture chrome fairing edge strips, suitable to re edge any Windjammer from 1973 on. This edging is brand new, gleaming, soft and supple. Kit includes instructions and enough adhesive (3 oz glue, 1 1/2 oz catylist) to install edging on one fairing.

$65    Item # 06-108

Same as above, new Genuine exact pattern and texture chrome fairing edge strips, brand new, gleaming, soft and supple. Kit includes an extra strip of Edging and enough adhesive (4 oz glue, 2 oz catylist) to install edging on one fairing plus a set of Lowers.

$85    Item # 06-109

Hotcha Repair Kit

Hotcha Repair Kit is what you need if your fairing has developed a crack. Works on any ABS fairing, which is about all of them, these days. Kit comes enough adhesive (4 oz glue, 2 oz catylist) and scraps of ABS plastic to pretty much repair any problem.

 $50   Item # 06-110

Tail Trunk Bunkees

You read right! The four rubber isolators are now available again in this kit with self locking nuts. New manufacture, soft isolators that must be used under Tail Trunks.

Don't mount a Tail Trunk without Bunkees.

$28   Item # 06-102

Original 9-Pin Plug Set

Sometimes when you acquire a used Vetter Fairing, you may not get the bike-side wiring harness. With this plug kit you can make your own bike-side harness. You get both male and female plugs which means you can rebuild the fairing-side harness too.

$19.50   Item # 06-106